February 2016
 << <Aug 2017> >>


Who's Online?

Member: 0
Visitors: 2

rss Syndication

Posts sent in: February 2016

05 Feb 2016 
This article explains our perspective about plastic recycling.

If you are just getting into it, stay on these starting pages explaining the basics in order to avoid big problems right at the start.

And actually it has nothing in connection with the known fact we would like you to get machinery from us; we are only talking about what to do, and especially what Never to do, if you are a beginner.

For example, you need to know a bit about plastic scraps

So, usually do not rush, take your time and read everything carefully because in this ocean there are always a complete large amount of sharks swimming, and most of them are invisible even.

For the "specialists" we come up with some web pages with detailed data about both machinery and complete systems.

If you're no expert please browse this first machinery for plastic recycling or better, should you choose know nothing at all about the subject begin from here: before starting.

We are in this business since almost 30 years and this may be the result of our experience but, because there is always time to learn more, if you have a good different opinion, please end up being so kind to let us know and we are ready to discuss the matter in deep details.

We'll never give up saying this is simply not a straightforward business and, if it is true a bunch can be created by you of money, the known fact it is possible to lose more holds true as well.

At the state, recycling isn't financed and only few countries are giving some kind of support and, in any case, once you commence, you are by your own so, listen to this:

Try to plan the business enterprise in the long term; specially should you be starting from scratch some time is taken by it to get your cash back.

Once you have double screw extruder your brand new machine set up and running, it doesn't automatically mean you'll be getting money out of it.

You need to understand and understand the machine (and we think vice-versa as well) because no machine nowadays accept everything so do not wait for miracles to happen; they never will.

You shall find hammers and wrenches left into scraps supply, and this not big package, but a bit of cotton fabric also, orange skins and whatever possible you cannot actually imagine.

Here we'll not be discussing the normal contamination you expect, because you bought a machine that may handle that, but close to what you aren't expecting.

All this to tell you this is a good business that needs to be approached the right way, with the right devices in terms of machinery but, much more, when it comes to mentality.
Admin · 20733 views · Leave a comment
04 Feb 2016 
The description of each machine is within its relative section.

Generally in most plastic recycling lines, sorting of scraps is the very first step.

Following the link you will discover some description of what manual and automatic sorting means, the bad and good areas of each one.

Equipment used for sorting are actually Bales Breaker, used for bottles washing mainly, Conveyor Belts with different create, Metal Separators and Detectors, with different Trommels and configurations.

After separation plastic scraps is going to size reduction; in this section we mixer extruder are discussing Shredders and Granulators.

A good separation is why is the ultimate product pure therefore there exists a description of Dry Separators and wet separation with Sink-Float Tanks and Hydrocyclones.

Addititionally there is some description of different ways of washing using Washing Machines with some small explanation about Pre-Washing systems, according with the scarps you will be dealing with, together with rinsing methods with Rinse-Dryers and finally drying, that is the most difficult what to achieve in plastic recycling, by way of mechanical Centrifuges.

Other equipment commonly use are as well Classifiers, Dosing Units, and Mixing Silo.

Whenever your scrap is clean and dry, you should upgrade your final product according with what it is; for this you may want to opt for an Agglomerator (densifier) especially in the event of thin film washing, a Pelletizing Lines together with Polymer Filtration and talking about PET and any Crystal Polymer, an IV update through Solid State Polycondensation.

And do not forget dirt doesn't disappear but goes into Water; few words about a very important subject.

To see how to place everything collectively, please follow the link where there is a detailed information about how and why you need to, or shouldn't, use each one device.
Admin · 2788 views · Leave a comment
03 Feb 2016 
Plastic recycling equipment is a wide term that covers various technologies and different types of waste material plastic recycling machinery. The types of plastics materials that are being recycled decide the types of recycling machines for plastics required to recycle those plastics. A closed-loop plastics recycling system, or one where scrap material is taken from a processing line, in a factory manufacturing a single product in one resin type and in a single color, could be very simple. Scrap is merely taken off the line, fed into a shredder, granulator or grinder and reduced to the appropriate size, then conveyed back again to the beginning of the production line, where it is reintroduced as can be, or more often blended with virgin resins to getting reintroduced to the production process prior.

Open-loop recycling systems, whether processing post-industrial or perhaps post-consumer plastic waste, require multiple types of automated equipment technologies working in concert to achieve the desired result. These can include, but are not limited by: sorting, size lowering, separation, washing, baling, and pelletizing. Each plastic recycling process differs depending on the kind of plastic to be processed.

Sorting machines need to quickly determine and classify huge levels of post-consumer and/or post-industrial plastics, under constant responses. Advanced automated plastic sorting equipment can be built mixer extruder with sensors, ejectors, computer systems and user interfaces for maximum efficiency.

Separating equipment reduces the possibility of stock contamination and removes any nonreusable materials. The two types of processes are called wet or dry methods. The wet method use a float container that separates the plastic materials predicated on density. The dried out method employs weather separation technologies that separate materials types by density. Metals are separated also. Ferrous metals are taken away by using magnets and nonferrous metals are removed through the use of eddy-current separators.

The cleaning and washing stage removes residual dirt and residue, such as glue, paper, grit and sand. Plastic spend can go through a bath, friction washer or cleansing line, that applies a continuous hot spray along with detergents and disinfecting products for cleansing.

Pelletizing may be the final part of the plastic recycling process. The pelletizing machine generally uses a double or single screw extruder with different ratios with respect to the desired result. The single screw extruder runs on the pumping action as the double screw runs on the mixing function to generate the shape of the plastic for final use.

Whether you will need simple, closed-loop, plastics recycling machine equipment or a complex plastics recycling system, Useon group has the technologies, machine to recycle plastics, and the proper plastic recycling equipment prices. Most importantly, the encounter to meet those needs and reduce plastic recycling machine cost.
Admin · 1948 views · Leave a comment
02 Feb 2016 
With the world shifting towards "green" living, plastic recycling equipment is more popular than ever before across many industries that work with the material for all types of applications. Of throwing away defect plastic materials instead, these products could be shredded, repurposed and melted for unique end products. Recycling plastic is imperative in today's global climate, and Arlington Plastics Machinery has the plastic recycling equipment needed to lessen any company's ecological footprint.

There are plenty of types of plastic recycling equipment which reprocess plastic and make the material reusable for another product. From shredders and granulators to pelletizing extrusion lines and pelletizers , these machines may be used in conjunction to breakdown larger plastic pieces into smaller particles, melt the particles and mold the melted plastic right into a new product then. Arlington Plastics Machinery has each one of these types of machinery available including strand pelletizers, underwater pelletizers and liquid band pelletizers, for purchase located in our massive inventory.

Used Equipment for Recycling Plastic

The benefits to using recycling machinery are endless. Recycling plastic reduces costs and the waste of recycleables. This contributes right to a company's bottom line. Also, recycling machinery is often more energy conserving and permits increased productivity, both which influence a reduction in costs. Nevertheless, the most important advantage of recycling machinery is minimizing the waste materials in landfills and the detrimental effects it has extrusion systems on the earth. You can easily be more conscious through the use of recycling equipment to reuse plastic products environmentally.
Admin · 7926 views · Leave a comment
01 Feb 2016 
To explain all the aspects of the matter we are in need of 2,568,985 web pages and an eternity to write them all therefore this is a short resume of the entire story.

Before you go in details and ask for an offer, you should know two things very well:

First is you need to state the quality degree of the flakes you must have at the end.

Second, only by order, is the known fact you should be prepared to spend a lot of money.

And this is what it means:

For instance a flake, very best for fibres application, may contain 20 PPM of glue and, if this is the quantity, your customer shall be very happy.

The same material with 10 PPM of glue may also be good, after pelletizing and SSP, for bottles application.

Therefore, the difference is 10 PPM add up to 0,001% - Got the point ?

Actually this is simply not the only real difference because, again, the matter is a little bit more complicated, but gives you an idea of what we're talking about.

At the end, the big difference stays also in the price to get one quality versus another.

If you require a bottle to bottle top quality washing line, the quantity you'll read within the last page will never have significantly less than six zeros, and you're lucky if primary number is a 1, while for less quality the number can be shorter, not forgetting the difference in operating costs.

This "small" difference will also effects the composition of the line in other sections.

Sorting, that is the very first portion of the relative line, must be perfect, meaning no PVC, PS, PA or other plastics cannot reach the granulator because following this true stage these plastics cannot be recognized and removed. (yes, it could but is much too expensive)

Then, flakes go to air-separators to eliminate detached labels and plenty of of the dirt, pre-washing, separation simply by sink-float tanks, the cleaning process, rinsing that's is another very important step of the procedure and final drying.

When you got all of this, you're half of the best way to complete the create.

In fact you have flakes clean to the bone with caustic soda solution, detergents and all these good stuff, that's actually pretty easy to feed to the line and, as co extruder a consequence, you need to remove it.

Water filtration is as important because the washing line itself therefore.

An excellent filtration system(s) is what makes the line to perform well, and contain costs, also because in this instance, we are discussing hot water consequently energy costs are involved as well.

Next step is to transform your flakes into very clear pellets upgrading the quality to the very best.

To know more relating to this, go to SSP webpage where is writeen likewise how to avoid the traditional SSP and get the same or better quality without losing weight and obtain it FDA approved.
Admin · 977 views · Leave a comment