August 2017
 << < > >>


Who's Online?

Member: 0
Visitors: 3

rss Syndication

03 Feb 2016 - 08:26:46 am

Plastic Recycling Equipment2

Plastic recycling equipment is a wide term that covers various technologies and different types of waste material plastic recycling machinery. The types of plastics materials that are being recycled decide the types of recycling machines for plastics required to recycle those plastics. A closed-loop plastics recycling system, or one where scrap material is taken from a processing line, in a factory manufacturing a single product in one resin type and in a single color, could be very simple. Scrap is merely taken off the line, fed into a shredder, granulator or grinder and reduced to the appropriate size, then conveyed back again to the beginning of the production line, where it is reintroduced as can be, or more often blended with virgin resins to getting reintroduced to the production process prior.

Open-loop recycling systems, whether processing post-industrial or perhaps post-consumer plastic waste, require multiple types of automated equipment technologies working in concert to achieve the desired result. These can include, but are not limited by: sorting, size lowering, separation, washing, baling, and pelletizing. Each plastic recycling process differs depending on the kind of plastic to be processed.

Sorting machines need to quickly determine and classify huge levels of post-consumer and/or post-industrial plastics, under constant responses. Advanced automated plastic sorting equipment can be built mixer extruder with sensors, ejectors, computer systems and user interfaces for maximum efficiency.

Separating equipment reduces the possibility of stock contamination and removes any nonreusable materials. The two types of processes are called wet or dry methods. The wet method use a float container that separates the plastic materials predicated on density. The dried out method employs weather separation technologies that separate materials types by density. Metals are separated also. Ferrous metals are taken away by using magnets and nonferrous metals are removed through the use of eddy-current separators.

The cleaning and washing stage removes residual dirt and residue, such as glue, paper, grit and sand. Plastic spend can go through a bath, friction washer or cleansing line, that applies a continuous hot spray along with detergents and disinfecting products for cleansing.

Pelletizing may be the final part of the plastic recycling process. The pelletizing machine generally uses a double or single screw extruder with different ratios with respect to the desired result. The single screw extruder runs on the pumping action as the double screw runs on the mixing function to generate the shape of the plastic for final use.

Whether you will need simple, closed-loop, plastics recycling machine equipment or a complex plastics recycling system, Useon group has the technologies, machine to recycle plastics, and the proper plastic recycling equipment prices. Most importantly, the encounter to meet those needs and reduce plastic recycling machine cost.
Admin · 1949 views · Leave a comment

Permanent link to full entry


No Comment for this post yet...

Leave a comment

New feedback status: Published

Your URL will be displayed.

Please enter the code written in the picture.

Comment text

   (Set cookies for name, e-mail and url)